| |
Please see our accessories page to find high temperature wire, temperature controllers, ring terminals and related supplies.
|
| |
For all Ceramic Band Heaters without clamping tabs, the following number of closures are used:
Width |
Number of Closures |
1" - 3" |
1 |
3.5" - 5" |
2 |
5.5" - 8" |
3 |
8.5" - 12" |
4 |
12.5" - 16" |
5 |
Please call your Thermal Corporation Customer Service advisor if you have any questions or special requirements for your heater. Three phase and dual voltage is also available.
|
|
Configuration 602
- One-piece ceramic band heater
- Post Terminals - 180° from gap
- Barrel Nuts
- (Order 602H for Heat Saver Insulation)
- With or without terminal box option.
Configuration 603
- Two-piece ceramic band heater
- Post Terminals - 90° from gap
- Barrel Nuts
- (Order 603H for Heat Saver Insulation)
|
Please Note: Depending on specific application, exposed post terminals on band heaters may be in violation of electrical codes. We encourage compliance to applicable electrical codes or suggest using a terminal box or ceramic terminal covers.
|
|
Configuration 604
- One-piece ceramic band heater
- Post Terminals - 180° from gap
- Latch and Trunnion
- (Order 604H for Heat Saver Insulation)
With or without terminal box option.
Configuration 605
- Two-piece ceramic band heater
- Post Terminals - 90° from gap
- Latch and Trunnion
- (Order 605H for Heat Saver Insulation)
Ready to order?
All you need is the diameter, width, wattage and voltage, then call 800-633-2962 or email us HERE.
|
|
|
Configuration 606
- One-piece ceramic band heater
- Post Terminals - 180° from gap
- Clamping Tabs
- (Order 606H for Heat Saver Insulation)
- With or without terminal box option.
Configuration 607
- Two-piece ceramic band heater
- Post Terminals - 90° from gap
- Clamping Tabs
- (Order 607H for Heat Saver Insulation)
|
|
|
Configuration 614
- One-piece ceramic band heater
- Stainless Steel Hose - 180° from gap
- Latch and Trunnion
- (Order 614H for Heat Saver Insulation)
Configuration 615
- Two-piece ceramic band heater
- Stainless Steel Hose - 90° from gap
- Latch and Trunnion
- (Order 615H for Heat Saver Insulation)
|
|
|
Configuration 616
- One-piece ceramic band heater
- Stainless Steel Braid - 180° from gap
- Latch and Trunnion
- (Order 616H for Heat Saver Insulation)
Configuration 617
- Two-piece ceramic band heater
- Stainless Steel Braid - 90° from gap
- Latch and Trunnion
- (Order 617H for Heat Saver Insulation)
|
|
|
Configuration 618
- One-piece ceramic band heater
- Stainless Steel Braid - 180° from gap
- Clamping Tabs
- (Order 618H for Heat Saver Insulation)
Configuration 619
- Two-piece ceramic band heater
- Stainless Steel Braid - 90° from gap
- Clamping Tabs
- (Order 619H for Heat Saver Insulation)
Ready to order?
All you need is the diameter, width, wattage and voltage, then call 800-633-2962 or email us HERE.
|
|
|
Configuration 620
- One-piece ceramic band heater
- Stainless Steel Hose - 180° from gap
- Clamping Tabs
- (Order 620H for Heat Saver Insulation)
Configuration 621
- Two-piece ceramic band heater
- Stainless Steel Braid - 90° from gap
- Clamping Tabs
- (Order 621H for Heat Saver Insulation)
|
|
|
Configuration 622
- One-piece ceramic band heater
- Stainless Steel Braid - 180° from gap
- Barrel Nuts
- (Order 622H for Heat Saver Insulation)
Configuration 623
- Two-piece ceramic band heater
- Stainless Steel Braid - 90° from gap
- Barrel Nuts
- (Order 623H for Heat Saver Insulation)
|
|
|
Configuration 624
- One-piece ceramic band heater
- Stainless Steel Hose - 180° from gap
- Barrel Nuts
- (Order 624H for Heat Saver Insulation)
Configuration 625
- Two-piece ceramic band heater
- Stainless Steel Hose - 90° from gap
- Barrel Nuts
- (Order 625H for Heat Saver Insulation)
|
|
|
Ready to order or need a quote?
Please fill out the form below and Thermal will email you with price and delivery.
Or give us a call at 800-633-2962.
If you're ordering a two-piece band heater, specify the wattage and voltage you want per half.
Ceramic band heater widths are available only in 1/2" increments. |
|
| |
|
Updated
March 8, 2007
|
