Thermal Corporation carries a broad selection of Fuji PX series temperature controllers for an accurate and cost effective way to control the temperatures of your process. If you don't see the exact configuration you require, please give us a call at 1.800.633.2962.
The Fuji controllers in the PXR Series are the latest additions to Fuji Electric’s trusted line of process and temperature controllers.
In addition to auto-tuning and fuzzy control, these Fuji controllers now comes with self-tuning - an innovation in the control field. Self-tuning automatically retunes the controller under certain conditions, without the need to revert to auto-tuning.
The standard 8-segment ramp/soak feature has been expanded to include two patterns that can be linked to create a 16-step profile.
The Fuji PXR Series accepts temperature and process inputs and offers a choice of three kinds of outputs to meet a wide variety of needs in the process industries. Single or dual outputs include relay, SSR driver, or 4-20mA.
One of the most impressive features of these Fuji controllers is the large LED display. The faceplate, designed for NEMA 4X (IP66 equivalent) is watertight and corrosion-resistant. The easy-to-use 3-button keypad allows for programming similar to the popular PXW controller. The screw-terminal on the back further reduces the cost by eliminating the need for sockets. The Fuji PXR3 can be DIN-rail mounted with the optional adapter.
Advantages:
Largest Display of any 1/16 DIN Controller
High Performance
Economical
Specifications Summary:
Universal process input
Auto manual operation with A/M key
Position feedback control
Smart ramp-soak with guaranteed soak
8 PID palettes
PC program loader interface
32-segment ramp/soak feature at no additional cost
Display blinks on alarm condition
Remote setpoint
Analog retransmission
Small size fits 1/16 DIN cut out (1-25/32" x 1-25/32") x 3-1/2" deep
Full Auto-tune PID functions, self tune, fuzzy logic
Inputs: accepts most thermocouples, RTDs or current/voltage inputs
Output-relay contact, current or SSR drive output
Indication - 4-digit, 7 segment LED
Operates on any AC voltage from 100V to 240V
Very flexible and easy to use due to microprocessor control
Waterproof - conforms to NEMA 4X/IP66
Security Lock-Out to prevent unauthorized changes
Product
Catalog #
Single Output No Alarm. Single Display
5040-02
Basic Unit -
No Alarm
5040-10
Basic Unit + Alarm
5040-11
Dual Output (Heat\Cool) - No Alarm
5040-12
Dual Output (Heat\Cool) + Alarm
5040-13
Please call for current pricing.
You can use the order form at the bottom of this page to order any item here or give us a call at 800.633.2962 to speak with a customer service representative.
Easy Setup: (Programming) Though model PXR is a technically advanced temperature controller with extensive programming flexibility, the setup is typically very simple:
For many cases all that is required is:
1. Key in the Set point Temperature
2. Set Auto Tune from Off on On
Specifications:
Type of Control
ON/OFF - heat is turned on when process temperature is below set point
PID - ( Proportional, Integral, Derivative ) with proportional control, the heater is turned on for a larger or smaller percent of time depending on the amount of heat needed. Integral - and adjustment to remove the offset difference between the set point and the point at which the proportional control stabilizes. Derivative - adjust the speed with which the control system responds to rapid changes in demand and also affects the control of overshoot.
Auto-tune-control - Controller automatically selects proper PID Values Self tunes - automatically tunes the controller under certain conditions.
Ramp- to - Set point
Inputs (Programmable)
Thermocouples J, K, R, B, S, T, E, N, and PC2
RTD Pt100
Voltage Input 1-5V DC*
Current Input 4 - 20 ma DC
Outputs
Relay Contact 3 A@220V
Current Output 4-20maDC*
SSR Driver*
Optional 2nd Output for cooling
Alarms
One Relay Contact Output
Programmable for absolute temperature or deviation from set point
Accuracy
± (0.5% full scale + 1 digit)
Power
Source 100-240V AC
Consumption 10 watts
Communications Option - RS485
Operating / Storage Conditions
Ambient Temp. 14° to 122°F
Storage Temp. -4° to 140° F
Relative Humidity 90% or less
Ordering's Easy!
You can give us a call at 800.633.2963 or use the handy form below if you already have an account with us. If you haven't opened an account with us yet, you can still use it and we'll email or call you back to help you set up an account or arrange payment.
