Our typical lead configuration has the leads near the gap for efficiency of heat distribution.  If you need the leads exiting at another location such as opposite the gap, please call customer service because it's easy for Thermal to manufacture exactly the heater you are looking for.

Configuration 500

• One-piece band heater with flexible leads with stainless steel overbraid and  separate strap.
• Diameters from 1" to 15",  Widths from 1" to 10"

Configuration 501

• Two-piece mica band heater, flexible leads with stainless steel overbraid and separate strap. When specifying wattage and voltage, give wattage & voltage for each individual half.
• Diameters from 2" to 30", Widths from 1" to 10"

Need a quote or are you ready to order?

All you need is the diameter, width, wattage and voltage,

then call us at 800-633-2962 or use the form at the bottom of this page.

Configuration 550

• One-piece mica band heater, flexible leads (no metal overbraid) and separate strap. 
• Diameters from 1" to 15",  Widths from 5/8" to 10"

Configuration 551

• Two-piece mica band heater, flexible leads (no metal overbraid) and separate strap. When specifying wattage and voltage, give wattage & voltage for each individual half
• Diameters from 2" to 30",  Widths from 5/8" to 10"

Configuration 516

• One-piece mica band heater,  flexible leads with stainless steel overbraid and separate strap.
• Diameters from  1 1/2" to 15",  Widths from 1" to 5"
• For widths 5" to 10", specify  configuration 546.

Configuration 546

• One-piece mica band heater, flexible leads with stainless steel over braid and separate strap. Same as configuration 516 except with folded ends.
• Diameters from 3" to 14",  Widths from 2" to 10"

Configuration 517

• Two-piece mica band heater, flexible leads with stainless steel overbraid located at one end of each half, separate clamping straps. When specifying wattage and voltage, give wattage & voltage for each individual half. 
• Diameters from 3" to 30", Widths from 1" to 5"
• For widths 5" to 10", specify  configuration 547.

Configuration 547

• Two-piece mica band heater, flexible leads with stainless steel overbraid located at one end of each half, separate clamping straps. When specifying wattage and voltage, give wattage & voltage for each individual half. 
• Diameters from 4" to 28", Widths from 2" to 10"

Need a quote or are you ready to order?

All you need is the diameter, width, wattage and voltage,

then call us at 800-633-2962 or use the form at the bottom of this page.

Configuration 536

• One-piece, expandable band heater  (made as a one-piece heater, but notched and designed to be bent open to fit over a cylinder, then bent closed), flexible leads with stainless steel overbraid locate on one end, separate strap.
• Diameters from 1 1/2" to 15", Widths from 1" to 5"

Configuration 514

• One-piece mica band heater,  flexible leads with stainless steel hose and separate strap.
• Diameters from  1 1/2" to 15",  Widths from 1" to 5"
• For widths 5" to 10", specify  configuration 544.

Configuration 544

• One-piece mica band heater, flexible leads with stainless steel hose and separate strap. Same as configuration 514 except with folded ends.
• Diameters from 3" to 14",  Widths from 2" to 10"

Configuration 515

• Two-piece mica band heater, flexible leads with stainless steel hose and separate strap. When specifying wattage and voltage, give wattage & voltage for each individual half. 
• Diameters from 3" to 30", Widths from 1" to 5"
• For widths 5" to 9", specify  configuration 545.

Configuration 545

• Two-piece band heater, flexible leads with stainless steel hose and separate strap.  Same as Configuration 515 except with folded ends. When specifying wattage and voltage, give wattage & voltage for each individual half. 
• Diameters from 4" to 28", Widths from 2" to 10"

Need a quote or are you ready to order?

All you need is the diameter, width, wattage and voltage,

then call us at 800-633-2962 or use the form at the bottom of this page.

Configuration 538

• One-piece, expandable mica band heater (made as a one-piece heater, but notched and designed to be bent open to fit over a cylinder, then bent closed), flexible leads with stainless steel hose locate on one end, separate strap.
• Diameters from 1 1/2" to 15", Widths from 1" to 5"

Ready to order or need a quote?

Please fill out the form below and Thermal will email you with price and delivery.

Or, feel free to give us a call at 800-633-2962 and speak with one of our friendly customer service people.

If you're ordering two-piece band heaters, specify the wattage and voltage you want per half.