Products > Mica Band Heaters > Standard Mica Band Heaters > Post Terminals w/Straps

heater bands standard

Heater Bands – Post Terminals with Straps

 

These are Thermal’s standard styles with straps and post terminals available for quick manufacture and shipment in the size restraints listed under each configuration.

If you need terminations at a different location, please let us know and we can design the band heater to your exact specifications. All the post terminals on the configurations shown are 10-24 thread.

Please Note: Depending on specific application, exposed post terminals may be in violation of electrical codes. We encourage compliance to applicable electrical codes and suggest using terminal boxes or ceramic terminal covers where possible.

 

heater bands standard

Configuration 502

  • One-piece mica band heater with post terminals located on each end and separate strap.
  • Diameters from 1-1/2″ to 15″,  Widths from 1″ to 5″
  • For widths 5″ to 10 “, specify configuration 532.

 

heater bands standard

Configuration 503

  • Two-piece, post terminals on each end of each half, separate strap. When specifying wattage and voltage, give wattage & voltage for each individual half.
  • Diameters from 3″ to 30″, Widths from 1″ to 5″
  • For widths 5″ to 10″, specify configuration 533

 

heater bands standard

Configuration 532

  • One-piece, post terminals located one on each  end  and separate straps. Same as Configuration 502 except with folded ends.
  • Diameters from 3″ to 14″,  Widths from 2″ to 10″

 

heater bands custom

Configuration 533

  • Two-piece, post terminals located one on each end of each half, separate straps. Same as Configuration 503 except with folded ends. When specifying wattage and voltage, give wattage & voltage for each individual half
  • Diameters from 5″ to 28″,  Widths from 2″ to 10″

 

heater bands custom

Configuration 534

  • One-piece expandable mica band heater (made as a one-piece heater, but notched & designed to be bent open to fit over a cylinder, then closed), post terminals located on each end, separate strap.
  • Diameters from  3″ to 15″,  Widths from 1″ to 5 1/2″

 

heater bands customConfiguration 506

  • One-piece heater, post terminals located side-by-side on one end, and  separate straps.
  • Diameters from 3″ to 14″, Widths from 2 1/2″ to 10″

heater bands custom

Configuration 507

  • Two-piece band heater, post terminals located side-by-side on one end of each half, separate straps. When specifying wattage and voltage, give wattage & voltage for each individual half.
  • Diameters from 4″ to 28″, Widths from 2 1/2″ to 10″

 

band heaters customConfiguration 528

  • One-piece, post terminals located two-in-line at one end, and  separate strap.
  • Diameters from 3″ to 15″,  Widths from 1″ to 5″

 

band heaters custom

Configuration 529

  • Two-piece band heater, post terminals located two-in-line at one end of each half, separate clamping straps. When specifying wattage and voltage, give wattage & voltage for each individual half.
  • Diameters from 3″ to 30″, Widths from 1″ to 5″